Skip to content
Topics
Year 9
Fundamentals
Ionic Bonding
Key Reactions
Simple Molecules & Covalent Bonding
Alkanes & Crude Oil
Year 10
Calculations
Kinetics
Alkenes & Polymers
Metal reactivity & Halogens
Moles
Energetics
Acids & Salts
Structure & Bonding
Year 11
Electrolysis
Alcohols & Carboxylic Acids
Equilibria
Condensation Polymers
Key Calculations
Specification experiments
Spec lists
Full Spec Points
Spec (double only)
Spec (single only)
New for 2019 exam
Year 9 Spec Points
Year 10 Spec Points
Year 9&10 Spec Points
Year 9&10 double only
Physics
Full Spec Points
Spec (double only)
Spec (single only)
Spec sections
1 Chemistry Principles
1:01 understand the three states of matter in terms of the arrangement, movement and energy of the particles
1:02 understand the interconversions between the three states of matter in terms of: the names of the interconversions, how they are achieved and the changes in arrangement, movement and energy of the particles
1:03 understand how the results of experiments involving the dilution of coloured solutions and diffusion of gases can be explained
1:04 know what is meant by the terms: solvent, solute, solution, saturated solution
1:05 (Triple only) know what is meant by the term solubility in the units g per 100g of solvent
1:06 (Triple only) understand how to plot and interpret solubility curves
1:07 (Triple only) practical: investigate the solubility of a solid in water at a specific temperature
1:08 understand how to classify a substance as an element, a compound or a mixture
1:09 understand that a pure substance has a fixed melting and boiling point, but that a mixture may melt or boil over a range of temperatures
1:10 describe these experimental techniques for the separation of mixtures: simple distillation, fractional distillation, filtration, crystallisation, paper chromatography
1:11 understand how a chromatogram provides information about the composition of a mixture
1:12 understand how to use the calculation of Rf values to identify the components of a mixture
1:13 practical: investigate paper chromatography using inks/food colourings
1:14 know what is meant by the terms atom and molecule
1:15 know the structure of an atom in terms of the positions, relative masses and relative charges of sub-atomic particles
1:16 know what is meant by the terms atomic number, mass number, isotopes and relative atomic mass (Aᵣ)
1:17 be able to calculate the relative atomic mass of an element (Aᵣ) from isotopic abundances
1:18 understand how elements are arranged in the Periodic Table: in order of atomic number, in groups and periods
1:19 understand how to deduce the electronic configurations of the first 20 elements from their positions in the Periodic Table
1:20 understand how to use electrical conductivity and the acid-base character of oxides to classify elements as metals or non-metals
1:21 identify an element as a metal or a non-metal according to its position in the Periodic Table
1:22 understand how the electronic configuration of a main group element is related to its position in the Periodic Table
1:23 Understand why elements in the same group of the Periodic Table have similar chemical properties
1:24 understand why the noble gases (Group 0) do not readily react
1:25 write word equations and balanced chemical equations (including state symbols): for reactions studied in this specification and for unfamiliar reactions where suitable information is provided
1:26 calculate relative formula masses (including relative molecular masses) (Mᵣ) from relative atomic masses (Aᵣ)
1:27 know that the mole (mol) is the unit for the amount of a substance
1:28 understand how to carry out calculations involving amount of substance, relative atomic mass (Aᵣ) and relative formula mass (Mᵣ)
1:29 calculate reacting masses using experimental data and chemical equations
1:30 calculate percentage yield
1:31 understand how the formulae of simple compounds can be obtained experimentally, including metal oxides, water and salts containing water of crystallisation
1:32 know what is meant by the terms empirical formula and molecular formula
1:33 calculate empirical and molecular formulae from experimental data
1:34 (Triple only) understand how to carry out calculations involving amount of substance, volume and concentration (in mol/dm³) of solution
1:37 understand how ions are formed by electron loss or gain
1:38 know the charges of these ions: metals in Groups 1, 2 and 3, non-metals in Groups 5, 6 and 7, Ag⁺, Cu²⁺, Fe²⁺, Fe³⁺, Pb²⁺, Zn²⁺, hydrogen (H⁺), hydroxide (OH⁻), ammonium (NH₄⁺), carbonate (CO₃²⁻), nitrate (NO₃⁻), sulfate (SO₄²⁻)
1:38b know the charges of these ions: metals in Groups 1, 2 and 3, non-metals in Groups 5, 6 and 7, hydrogen (H⁺), hydroxide (OH⁻), ammonium (NH₄⁺), carbonate (CO₃²⁻), nitrate (NO₃⁻), sulfate (SO₄²⁻)
1:39 write formulae for compounds formed between the ions listed in 1:38
1:40 draw dot-and-cross diagrams to show the formation of ionic compounds by electron transfer, limited to combinations of elements from Groups 1, 2, 3 and 5, 6, 7 only outer electrons need be shown
1:41 understand ionic bonding in terms of electrostatic attractions
1:42 understand why compounds with giant ionic lattices have high melting and boiling points
1:43 Know that ionic compounds do not conduct electricity when solid, but do conduct electricity when molten and in aqueous solution
1:44 know that a covalent bond is formed between atoms by the sharing of a pair of electrons
1:45 understand covalent bonds in terms of electrostatic attractions
1:46 understand how to use dot-and-cross diagrams to represent covalent bonds in: diatomic molecules, including hydrogen, oxygen, nitrogen, halogens and hydrogen halides, inorganic molecules including water, ammonia and carbon dioxide, organic molecules containing up to two carbon atoms, including methane, ethane, ethene and those containing halogen atoms
1:47 explain why substances with a simple molecular structures are gases or liquids, or solids with low melting and boiling points. The term intermolecular forces of attraction can be used to represent all forces between molecules
1:48 explain why the melting and boiling points of substances with simple molecular structures increase, in general, with increasing relative molecular mass
1:49 explain why substances with giant covalent structures are solids with high melting and boiling points
1:50 explain how the structures of diamond, graphite and C
60
fullerene influence their physical properties, including electrical conductivity and hardness
1:51 know that covalent compounds do not usually conduct electricity
1:52 (Triple only) know how to represent a metallic lattice by a 2-D diagram
1:53 (Triple only) understand metallic bonding in terms of electrostatic attractions
1:54 (Triple only) explain typical physical properties of metals, including electrical conductivity and malleability
1:55 (Triple only) understand why covalent compounds do not conduct electricity
1:56 (Triple only) understand why ionic compounds conduct electricity only when molten or in aqueous solution
1:57 (Triple only) know that anion and cation are terms used to refer to negative and positive ions respectively
1:58 (Triple only) describe experiments to investigate electrolysis, using inert electrodes, of molten compounds (including lead(II) bromide) and aqueous solutions (including sodium chloride, dilute sulfuric acid and copper(II) sulfate) and to predict the products
1:59 (Triple only) write ionic half-equations representing the reactions at the electrodes during electrolysis and understand why these reactions are classified as oxidation or reduction
1:60 (Triple only) practical: investigate the electrolysis of aqueous solutions
2 Inorganic chemistry
2:01 understand how the similarities in the reactions of lithium, sodium and potassium with water provide evidence for their recognition as a family of elements
2:02 understand how the differences between the reactions of lithium, sodium and potassium with air and water provide evidence for the trend in reactivity in Group 1
2:03 use knowledge of trends in Group 1 to predict the properties of other alkali metals
2:04 (Triple only) explain the trend in reactivity in Group 1 in terms of electronic configurations
2:05 know the colours, physical states (at room temperature) and trends in physical properties of chlorine, bromine and iodine
2:06 use knowledge of trends in Group 7 to predict the properties of other halogens
2:07 understand how displacement reactions involving halogens and halides provide evidence for the trend in reactivity in Group 7
2:08 (Triple only) explain the trend in reactivity in Group 7 in terms of electronic configurations
2:09 know the approximate percentages by volume of the four most abundant gases in dry air
2:10 understand how to determine the percentage by volume of oxygen in air using experiments involving the reactions of metals (e.g. iron) and non-metals (e.g. phosphorus) with air
2:11 describe the combustion of elements in oxygen, including magnesium, hydrogen and sulfur
2:12 describe the formation of carbon dioxide from the thermal decomposition of metal carbonates, including copper(II) carbonate
2:13 know that carbon dioxide is a greenhouse gas and that increasing amounts in the atmosphere may contribute to climate change
2:14 Practical: determine the approximate percentage by volume of oxygen in air using a metal or a non-metal
2:15 understand how metals can be arranged in a reactivity series based on their reactions with: water and dilute hydrochloric or sulfuric acid
2:16 understand how metals can be arranged in a reactivity series based on their displacement reactions between: metals and metal oxides, metals and aqueous solutions of metal salts
2:17 know the order of reactivity of these metals: potassium, sodium, lithium, calcium, magnesium, aluminium, zinc, iron, copper, silver, gold
2:18 know the conditions under which iron rusts
2:19 understand how the rusting of iron may be prevented by: barrier methods, galvanising and sacrificial protection
2:19a understand how the rusting of iron may be prevented by: barrier methods, galvanising
2:20 in terms of gain or loss of oxygen and loss or gain of electrons, understand the terms: oxidation, reduction, redox, oxidising agent, reducing agent, in terms of gain or loss of oxygen and loss or gain of electrons
2:21 practical: investigate reactions between dilute hydrochloric and sulfuric acids and metals (e.g. magnesium, zinc and iron)
2:22 (Triple only) know that most metals are extracted from ores found in the Earth’s crust and that unreactive metals are often found as the uncombined element
2:23 (Triple only) explain how the method of extraction of a metal is related to its position in the reactivity series, illustrated by carbon extraction for iron and electrolysis for aluminium
2:24 (Triple only) be able to comment on a metal extraction process, given appropriate information
2:25 (Triple only) explain the uses of aluminium, copper, iron and steel in terms of their properties the types of steel will be limited to low-carbon (mild), high-carbon and stainless
2:26 (Triple only) know that an alloy is a mixture of a metal and one or more elements, usually other metals or carbon
2:27 (Triple only) explain why alloys are harder than pure metals
2:28 describe the use of litmus, phenolphthalein and methyl orange to distinguish between acidic and alkaline solutions
2:28a describe the use of litmus to distinguish between acidic and alkaline solutions
2:29 understand how to use the pH scale, from 0–14, can be used to classify solutions as strongly acidic (0–3), weakly acidic (4–6), neutral (7), weakly alkaline (8–10) and strongly alkaline (11–14)
2:30 describe the use of Universal Indicator to measure the approximate pH value of an aqueous solution
2:31 know that acids in aqueous solution are a source of hydrogen ions and alkalis in a aqueous solution are a source of hydroxide ions
2:32 know that bases can neutralise acids
2:33 (Triple only) describe how to carry out an acid-alkali titration
2:34 know the general rules for predicting the solubility of ionic compounds in water: common sodium, potassium and ammonium compounds are soluble, all nitrates are soluble, common chlorides are soluble, except those of silver and lead(II), common sulfates are soluble, except for those of barium, calcium and lead(II), common carbonates are insoluble, except for those of sodium, potassium and ammonium, common hydroxides are insoluble except for those of sodium, potassium and calcium (calcium hydroxide is slightly soluble)
2:35 understand acids and bases in terms of proton transfer
2:36 understand that an acid is a proton donor and a base is a proton acceptor
2:37 describe the reactions of hydrochloric acid, sulfuric acid and nitric acid with metals, bases and metal carbonates (excluding the reactions between nitric acid and metals) to form salts
2:38 know that metal oxides, metal hydroxides and ammonia can act as bases, and that alkalis are bases that are soluble in water
2:39 describe an experiment to prepare a pure, dry sample of a soluble salt, starting from an insoluble reactant
2:40 (Triple only) describe an experiment to prepare a pure, dry sample of a soluble salt, starting from an acid and alkali
2:41 (Triple only) describe an experiment to prepare a pure, dry sample of an insoluble salt, starting from two soluble reactants
2:42 practical: prepare a sample of pure, dry hydrated copper(II) sulfate crystals starting from copper(II) oxide
2:43 (Triple only) practical: prepare a sample of pure, dry lead(II) sulfate
2:44a describe tests for these gases: hydrogen, carbon dioxide
2:44 describe tests for these gases: hydrogen, oxygen, carbon dioxide, ammonia, chlorine
2:45 describe how to carry out a flame test
2:46 know the colours formed in flame tests for these cations: Li⁺ is red, Na⁺ is yellow, K⁺ is lilac, Ca²⁺ is orange-red, Cu²⁺ is blue-green
2:47 describe tests for these cations: NH₄⁺ using sodium hydroxide solution and identifying the gas evolved, Cu²⁺, Fe²⁺ and Fe³⁺ using sodium hydroxide solution
2:48 describe tests for these anions: Cl⁻, Br⁻ and I⁻ using acidified silver nitrate solution, SO₄²⁻ using acidified barium chloride solution, CO₃²⁻ using hydrochloric acid and identifying the gas evolved
2:48a describe a test for CO₃²⁻ using hydrochloric acid and identifying the gas evolved
2:49 describe a test for the presence of water using anhydrous copper(II) sulfate
2:50 describe a physical test to show whether a sample of water is pure
3 Physical chemistry
3:01 know that chemical reactions in which heat energy is given out are described as exothermic, and those in which heat energy is taken in are described as endothermic
3:02 describe simple calorimetry experiments for reactions such as combustion, displacement, dissolving and neutralisation
3:03 calculate the heat energy change from a measured temperature change using the expression Q = mcΔT
3:04 calculate the molar enthalpy change (ΔH) from the heat energy change, Q
3:05 (Triple only) draw and explain energy level diagrams to represent exothermic and endothermic reactions
3:06 (Triple only) know that bond-breaking is an endothermic process and that bond-making is an exothermic process
3:07 (Triple only) use bond energies to calculate the enthalpy change during a chemical reaction
3:08 practical: investigate temperature changes accompanying some of the following types of change: salts dissolving in water, neutralisation reactions, displacement reactions and combustion reactions
3:09 describe experiments to investigate the effects of changes in surface area of a solid, concentration of a solution, temperature and the use of a catalyst on the rate of a reaction
3:10 describe the effects of changes in surface area of a solid, concentration of a solution, pressure of a gas, temperature and the use of a catalyst on the rate of a reaction
3:11 explain the effects of changes in surface area of a solid, concentration of a solution, pressure of a gas and temperature on the rate of a reaction in terms of particle collision theory
3:12 know that a catalyst is a substance that increases the rate of a reaction, but is chemically unchanged at the end of the reaction
3:13 know that a catalyst works by providing an alternative pathway with lower activation energy
3:14 (Triple only) draw and explain reaction profile diagrams showing ΔH and activation energy
3:15 practical: investigate the effect of changing the surface area of marble chips and of changing the concentration of hydrochloric acid on the rate of reaction between marble chips and dilute hydrochloric acid
3:16 practical: investigate the effect of different solids on the catalytic decomposition of hydrogen peroxide solution
3:17 know that some reactions are reversible and this is indicated by the symbol ⇌ in equations
3:18 describe reversible reactions such as the dehydration of hydrated copper(II) sulfate and the effect of heat on ammonium chloride
3:19 (Triple only) know that a reversible reaction can reach dynamic equilibrium in a sealed container
3:20 (Triple only) know that the characteristics of a reaction at dynamic equilibrium are: the forward and reverse reactions occur at the same rate, and the concentrations of reactants and products remain constant
3:21 (Triple only) understand why a catalyst does not affect the position of equilibrium in a reversible reaction
3:22 (Triple only) predict, with reasons, the effect of changing either pressure or temperature on the position of equilibrium in a reversible reaction (references to Le Chatelier’s principle are not required)
4 Organic chemistry
4:01 know that a hydrocarbon is a compound of hydrogen and carbon only
4:02 understand how to represent organic molecules using empirical formulae, molecular formulae, general formulae, structural formulae and displayed formulae
4:02a understand how to represent organic molecules using molecular formulae, general formulae, structural formulae and displayed formulae
4:03a know what is meant by the term isomerism
4:03 know what is meant by the terms homologous series, functional group and isomerism
4:04 understand how to name compounds relevant to this specification using the rules of International Union of Pure and Applied Chemistry (IUPAC) nomenclature. Students will be expected to name compounds containing up to six carbon atoms
4:05 understand how to write the possible structural and displayed formulae of an organic molecule given its molecular formula
4:06 understand how to classify reactions of organic compounds as substitution, addition and combustion. Knowledge of reaction mechanisms is not required
4:07 know that crude oil is a mixture of hydrocarbons
4:08 describe how the industrial process of fractional distillation separates crude oil into fractions
4:09 know the names and uses of the main fractions obtained from crude oil: refinery gases, gasoline, kerosene, diesel, fuel oil and bitumen
4:10 know the trend in colour, boiling point and viscosity of the main fractions
4:11 know that a fuel is a substance that, when burned, releases heat energy
4:12 know the possible products of complete and incomplete combustion of hydrocarbons with oxygen in the air
4:13 understand why carbon monoxide is poisonous, in terms of its effect on the capacity of blood to transport oxygen references to haemoglobin are not required
4:14 know that, in car engines, the temperature reached is high enough to allow nitrogen and oxygen from air to react, forming oxides of nitrogen
4:15 explain how the combustion of some impurities in hydrocarbon fuels results in the formation of sulfur dioxide
4:16 understand how sulfur dioxide and oxides of nitrogen oxides contribute to acid rain
4:19 know the general formula for alkanes
4:20 explain why alkanes are classified as saturated hydrocarbons
4:21 understand how to draw the structural and displayed formulae for alkanes with up to five carbon atoms in the molecule, and to name the unbranched-chain isomers
4:22 describe the reactions of alkanes with halogens in the presence of ultraviolet radiation, limited to mono-substitution knowledge of reaction mechanisms is not required
4:23 know that alkenes contain the functional group >C=C<
4:24 know the general formula for alkenes
4:25 explain why alkenes are classified as unsaturated hydrocarbons
4:26 understand how to draw the structural and displayed formulae for alkenes with up to four carbon atoms in the molecule, and name the unbranched-chain isomers. Knowledge of cis/trans or E/Z notation is not required
4:27 describe the reactions of alkenes with bromine, to produce dibromoalkanes
4:28 describe how bromine water can be used to distinguish between an alkane and an alkene
4:29 (Triple only) know that alcohols contain the functional group −OH
4:30 (Triple only) understand how to draw structural and displayed formulae for methanol, ethanol, propanol (propan-1-ol only) and butanol (butan-1-ol only), and name each compound, the names propanol and butanol are acceptable
4:31 (Triple only) know that ethanol can be oxidised by: burning in air or oxygen (complete combustion), reaction with oxygen in the air to form ethanoic acid (microbial oxidation), heating with potassium dichromate(VI) in dilute sulfuric acid to form ethanoic acid
4:32 (Triple only) know that ethanol can be manufactured by: 1) reacting ethene with steam in the presence of a phosphoric acid catalyst at a temperature of about 300⁰C and a pressure of about 60–70atm; and 2) the fermentation of glucose, in the absence of air, at an optimum temperature of about 30⁰C and using the enzymes in yeast
4:33 (Triple only) understand the reasons for fermentation, in the absence of air, and at an optimum temperature
4:34 (Triple only) know that carboxylic acids contain the functional group -COOH
4:35 (Triple only) understand how to draw structural and displayed formulae for unbranched- chain carboxylic acids with up to four carbon atoms in the molecule, and name each compound
4:36 (Triple only) describe the reactions of aqueous solutions of carboxylic acids with metals and metal carbonates
4:37 (Triple only) know that vinegar is an aqueous solution containing ethanoic acid
4:38 (Triple only) know that esters contain the functional group -COO-
4:39 (Triple only) know that ethyl ethanoate is the ester produced when ethanol and ethanoic acid react in the presence of an acid catalyst
4:40 (Triple only) understand how to write the structural and displayed formulae of ethyl ethanoate
4:41 (Triple only) understand how to write the structural and displayed formulae of an ester, given the name or formula of the alcohol and carboxylic acid from which it is formed and vice versa
4:42 (Triple only) know that esters are volatile compounds with distinctive smells and are used as food flavourings and in perfumes
4:43 (Triple only) practical: prepare a sample of an ester such as ethyl ethanoate
4:44 know that an addition polymer is formed by joining up many small molecules called monomers
4:45 understand how to draw the repeat unit of an addition polymer, including poly(ethene), poly(propene), poly(chloroethene) and (poly)tetrafluroethene
4:45a understand how to draw the repeat unit of an addition polymer poly(ethene)
4:46 understand how to deduce the structure of a monomer from the repeat unit of an addition polymer and vice versa
4:47 explain problems in the disposal of addition polymers, including: their inertness and inability to biodegrade, the production of toxic gases when they are burned
4:48 (Triple only) know that condensation polymerisation, in which a dicarboxylic acid reacts with a diol, produces a polyester and water
4:49 (Triple only) Understand how to write the structural and displayed formula of a polyester, showing the repeat unit, given the formulae of the monomers from which it is formed, including the reaction of ethanedioic acid and ethanediol:
4:50 (Triple only) know that some polyesters, known as biopolyesters, are biodegradable
testMyself
Flashcards
Quizzes
Q&A slides
Calculations practice
Past Papers
Links
Videos
Periodic table
Cryptic Crossword
Edexcel site
Links
Teaching
Simulations
Physics
Edexcel iGCSE Physics
1 Forces and motion
1(a) Units
(b) movement and position
(c) forces, movement, shape and momentum
2 Electricity
2(a) Units
(b) Mains electricity
(c) Energy and voltage in circuits
(d) Electric charge
3 Waves
3(a) Units
(b) Properties of waves
(c) The electromagnetic spectrum
(d) Light and sound
4 Energy resources and energy transfers
4(a) Units
(b) Energy transfers
(c) Work and power
(d) Energy resources and electricity generation
5 Solids, liquids and gasses
5(a) Units
(b) Density and pressure
(c) Change of state
(d) Ideal gas molecules
6 Magnetism and electromagnetism
6(a) Units
(b) Magnetism
(c) Electromagnetism
(d) Electromagnetic induction
7 Radioactivity and particles
7(a) Units
(b) Radioactivity
(c) Fission and fusion
8 Astrophysics
8(a) Units
(b) Motion in the universe
(c) Stellar evolution
(d) Cosmology
Physics topics
Year 9
Topic: Fundamentals of Forces
Topic: Fundamentals of Waves
Topic: Electromagnetic Spectrum
Topic: Pressure and Density
Topic: Fundamentals of Energy
Topic: Motion in the Universe
Topic: Fundamentals of Circuits
Topic: Movement and Position
Year 10
Topic: Light
Topic: Ideal Gas Laws
Topic: Heat Transfers
Topic: Radioactivity
Topic: Stars and Fusion
Topic: Mains Electricity
Topic: Moments and Momentum
Year 11
Topic: Challenging Forces
Topic: Challenging Waves
Topic: Specific Heat Capacity
Topic: Particles and Matter
Topic: Generating Electricity
Topic: Fission and Fusion
Topic: Cosmology
Topic: Challenging Astrophysics
Topic: Magnetism and Electromagnetism
Topic: Electromagnetic Induction
Search for:
Members
Members
Hydr0Gen
2020-03-01T12:47:50+00:00
Toggle Sliding Bar Area
Select a set of flashcards to study:
Terminology
Skills and equipment
Remove Flashcards
Section 1: Principles of chemistry
a) States of matter
b) Atoms
c) Atomic structure
d) Relative formula masses and molar volumes of gases
e) Chemical formulae and chemical equations
f) Ionic compounds
g) Covalent substances
h) Metallic crystals
i) Electrolysis
Section 2: Chemistry of the elements
a) The Periodic Table
b) Group 1 elements: lithium, sodium and potassium
c) Group 7 elements: chlorine, bromine and iodine
d) Oxygen and oxides
e) Hydrogen and water
f) Reactivity series
g) Tests for ions and gases
Section 3: Organic chemistry
a) Introduction
b) Alkanes
c) Alkenes
d) Ethanol
Section 4: Physical chemistry
a) Acids, alkalis and salts
b) Energetics
c) Rates of reaction
d) Equilibria
Section 5: Chemistry in industry
a) Extraction and uses of metals
b) Crude oil
c) Synthetic polymers
d) The industrial manufacture of chemicals
Page load link
Go to Top